Candidatii eJobs pot alege daca CVul lor este: CONFIDENTIAL, PUBLIC sau daca este disponibil doar clientilor eJobs. CVul de pe acesta pagina este public (fara date de contact insa). CVul Public ii ofera candidatului mai multe oportunitati de a fi gasit si contactat de potentiali angajatori. CVurile disponibile doar clientilor eJobs au un format mai complex, contin mai multe informatii si sunt mult mai detaliate.
Candidatii eJobs isi pot schimba in orice moment disponibilitatea CVului.

Daca sunteti firma si doriti sa contactati candidatul de mai jos, trimiteti-ne aceasta cerere la Contact@ejobsgroup.ro, alaturi de linkul catre aceasta pagina.

Unul din Relationship Managerii eJobs o sa va contacteze in maxim 24 de ore si o sa va ofere datele de contact DOAR dupa ce candidatul isi exprima acordul in acest sens.




Curriculum Vitae

informatii personale

 

M 02.06.1989

Permis conducere:  Cat.B,C,E, Data obtinerii:28.07.2007

Stagiu militar: nu

obiectiv

 

Maintenance Supervisor, Mechanical Engineer,Chief Mechanic, Driver Professional, Rig Mechanic,

Salariu: nespecificat

Tip job: Full time

Departament: Petrol / Gaze, Service / Reparatii, Audit / Consultanta

Oras de lucru: Bucuresti, Constanta, Galati, Ploiesti

Nivel Cariera: Senior-Level (> 5 ani)

Disponibil: oricand

experienta profesionala

 

01.01.2017 - prezent

Departament: petrol / gaze

Titlu Job: mechanical engineer,chief mechanic,

Responsabilitati:

Chief mechanic- Dafora Drilling 12.01.2017 - Present
• Diagnose, Maintain and repair Mechanical equipment according to manufacturer and company instructions and specifications and technical data;
• Responsible for: Bentec Euro Rig 5 from 2009 land rig, Cyber chair joystick Top drive TDS-11SA, CAT. 3512 DITA-1200HP engine, 2 -MUD PUMPS EWECO ,1-MUD PUMP T-1600Hp Bentec., B.O.P. ,Compressors Atlas Copco GA 45-150-P-HAV, Hydraulic unit, lifting equipment to raise and lower rig including winches crown block and cranes, Iron Roughneck ST80, Hydraulic Cathead – Drawworks Bentec 350 ton / 2500 Hp; Man Rider.
• Record keeping of equipment status and input (hours worked, parts replaced where necessary with associated comments and official handovers) to the maintenance program ASIS and Eresman;
• Receive and sort incoming parts and supplies;
• Store items in an orderly and accessible manner in a warehouse, tool room, supply room or other area;
• Process incoming requisitions and issue or distribute parts and supplies for internal usage;
• Maintain records of orders and the amount, kind and location of parts and supplies on hand using manual or computerized inventory system;
• Prepare requisition orders to replenish parts and supplies;
• Manage spare and replacement parts for vehicles, machinery and equipment;
• Advice planners, production personnel or internal users on appropriateness of parts, supplies or materials requested;

01.12.2014 - 31.12.2016

Departament: petrol / gaze

Titlu Job: rig mechanic

Responsabilitati:

Rig Mechanic - OGR recruiter for Transocean Deep Water DDII - offshore 19.12.2014–20.12.2016
• Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment on board the vessel
• Carry out mechanical, pneumatic and hydraulic installation, maintenance and repair in a safe and prudent manner;
TOP DRIVE HPS – 1000 T (NOV)
Articulated Roughneck ARN 166 Hidralift
Draw works AHD- 500 T (1150
Draw works AHD- 1000 T (2500 HP NOV), Cranes Hidralift 100 tone.
• Perform daily inspections and maintenance on mechanical equipment;
• Maintain and repair mechanical systems and equipment, prime, movers, air and water system, lubrication and fuel system;
• Troubleshoot and repair faulty mechanical, pneumatic and hydraulic equipment and tools;
• Carry out periodic maintenance according to the Rig Maintenance System (RMS) guidelines and coordinate that maintenance with supervisors and other department heads;
• Ensure that requirements concerning regulatory bodies are met in all cases of equipment repair and installation;
• Comply with the permit to work and isolation system;
• Maintain service reports and advise supervisor on condition of equipment and spare parts requirements;
• Perform machine work with lathe, drill press, grinding and surfacing equipment;
• Install, operate, maintain and repair additional or temporary mechanical equipment used for special operations;
• Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed and maintained while on the rig.
QHSE:
• Incorporate the THINK planning process into all tasks, whether working alone or as part of a team;
• Participate in START process;
• Call a time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed;
• Carry out assigned duties in a safe manner according to company policies and procedures;
• Actively participate in weekly safety meetings and pre-tour meetings are required.

01.10.2012 - 30.11.2014

Departament: petrol / gaze

Titlu Job: chief mechanic

Responsabilitati:

Chief Mechanic
Dafora Drilling – onshore 23.10.2012-01.11.2014
• Diagnose, Maintain and repair Mechanical equipment according to manufacturer and company instructions and specifications and technical data;
• Responsible for: Bentec Euro Rig 5 from 2009 land rig, Cyber chair joystick Top drive TDS-11SA, CAT. 3512 DITA-1200HP engine, 1600hp EWECO MUD PUMP , B.O.P. compressors Atlas Copco GA 45-150-P-HAV, Hydraulic unit, lifting equipment to raise and lower rig including winches crown block and cranes, Iron Roughneck ST80, Hydraulic Cathead – 31.5., Draw works Bentec 350 ton / 2500 Hp;
• Record keeping of equipment status and input (hours worked, parts replaced where necessary with associated comments and official handovers) to the maintenance program ASIS and Eresman;
• Receive and sort incoming parts and supplies;
• Store items in an orderly and accessible manner in a warehouse, tool room, supply room or other area;
• Process incoming requisitions and issue or distribute parts and supplies for internal usage;
• Maintain records of orders and the amount, kind and location of parts and supplies on hand using manual or computerized inventory system;
• Prepare requisition orders to replenish parts and supplies;
• Manage spare and replacement parts for vehicles, machinery and equipment;
• Advice planners, production personnel or internal users on appropriateness of parts, supplies or materials requested;
• Take inventory or examine merchandise to identify items to be reordered or replenished;
• Pack or ship inventory or maintenance and repair parts to destination;
• Compare inbound packing slips or invoices to items actually received to ensure that shipments are correct;
• Requisition merchandise from supplier based on available space, merchandise on hand, or customer demand;
• Receive and fill orders for parts;
• Examine and segregate returned parts for defects, and notify relevant internal department for disposition;
• Servicing, installing, adjusting, modifying and repairing equipment and tolls in the mechanical and engineering workshops;
• Setting up apparatus and teaching aids required by lecturing staff in classrooms and practical areas and advising on their suitability and use;
• Attending to the day to day running of one of the stores;
•Servicing, installing, adjusting, modifying and repairing equipment and tolls in the mechanical and engineering workshops;
• Setting up apparatus and teaching aids required by lecturing staff in classrooms and practical areas and advising on their suitability and use;
• Issuing, equipment, materials, components and other items used by lectures and students and ensuring safe storage of same;
• Recording and tabulating of test data;
• Attending to the day to day running of one of the stores;
• Communicating with suppliers to confirm availability, prices and other materials;
• Receiving and checking items delivered are in good condition and that they agreed with bother order and delivery documentation;
• Maintaining stock levels by consulting with senior staff and raising Purchase Requests as required;
• Assisting with periodic stock audits;
• Preparing and awaiting materials to workshop use;
• Ensuring compliance with all current Health and Safety legislation, including COSHH. This will involve regular checking of equipment, ensuring that chemicals and radioactive sources, if used, are handled, stored and disposed of safely and correctly. In general, ensuring that safe working practices are adopted and that all equipment is operated safely and records maintained.

studii

 

Facultati:

2012 - 2014 Masterat: Oil Extraction la Petroleum Oil and gas University din Ploiesti.
2008 - 2012 Facultate: Mechanical Engineer la Petroleum University Oil and gas din Ploiesti.

Premii

Calificari
Dec 2014: BOSIET

May 2013: H2S Certificate



Pagini: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20 

E timpul pentru un browser mai bun

De la 1 octombrie 2019, te informăm că site-ul eJobs.ro nu va mai putea fi accesat prin browser-ul Internet Explorer din cauza funcționalităților reduse ale acestuia. Accesează-ne cu încredere folosind unul dintre browserele mai moderne: Google Chrome, Mozilla Firefox, Safari sau Edge.

Am înțeles
close